|

|

|

|

|

|

|

Check out some of the incredible boats that we built for our customers. We customize each boat to personally suit the needs of our customers. Our boats are made with only the best parts, some of which are created right here at Activator.


	Vinyl Esther Resin. Encapsulated Balsa Core vacuum Bagged with Bi-directional Non-weaved fiberglass matt. Marine grade stringers and bulkhead also encapsulated in Resin for added strength and enhanced water resistence. 22 Degree Deadrise with an 13 degree transom angle w/ 8Ft Beam and 18”Draft Overall running Length 21’ 6”


	Vinyl Esther Resin. Encapsulated Balsa Core vacuum Bagged with Bi-directional Non-weaved fiberglass matt. Marine grade stringers and bulkhead also encapsulated in Resin for added strength and enhanced water resistence. 24 Degree Deadrise with a 13 degree transom angle. Twin step hull has a 24” draft and a 7 foot beam. Overall running length 26’ 6”


	Vinyl Esther Resin. Encapsulated Balsa Core vacuum Bagged with Bi-directional Non-weaved fiberglass matt. Marine grade stringers and bulkhead also encapsulated in Resin for added strength and enhanced water resistence. 24 Degree Deadrise with a 13 degree transom angle & swim platform. Twin step hull has a 24” draft and a 7 foot 6 inch beam. Overall running length 29’ 9”


	Vinyl Esther Resin. Encapsulated Balsa Core vacuum Bagged with Bi-directional Non-weaved fiberglass matt. Marine grade stringers and bulkhead also encapsulated in Resin for added strength and enhanced water resistence. 24 Degree Deadrise twin step design with a 24” Draft. Tramsom Angle 13 Degrees and 7 Foot Beam. Overall Length 31’ 6”